Get ready for the 2nd generation of speed controllers.

NITRIDE 1/10 G2 is a new generation electronic speed controller for sensor-controlled brushless DC motors. Thanks to advanced cooling technology based on an aluminium nitride ceramic heat sink, NITRIDE 1/10 has excellent thermal conductivity and can be used with powerful motors from 4.5 T upwards.

NITRIDE 1/10 G2 offers revolutionary real-time monitoring of battery current and discharge as well as innovative intelligent algorithms to protect the ESC in the event of motor failure or mechanical problems. NITRIDE 1/0 G2 has a matt TFT colour LCD display and requires no additional interface. Easy setting customisation with 3 buttons on the display.

Programmable parameters and functions: - Revolutionary simple Rx calibration. - Real-time monitoring: battery voltage, ESC and motor temperatures, motor diagnostics and more. - Revolutionary monitoring of battery current and discharge. - Pre-race diagnostics: Motor temperature, sensor cable, defective motor, battery, BEC voltage and more. - Easy programming: throttle, brake, boost and turbo timing, Hall angle and many other functions. - Recording of race data, temperature and other curves, histograms and more. The data is saved after the ESC is switched off. - Adjustable maintenance reminder for easy checking. - No programming interface required.

Main features: - TFT LCD colour display, matt finish - The LCD colour display with a resolution of 160 x 80 pixels allows you to set all parameters and check all data directly on your ESC without the need for a programming card or mobile application. Everything you need is in your ESC. Operation is really simple - with 3 buttons you can quickly set everything you need and a single glance is enough to check all the parameters necessary for the race. Simple. Fast. Precise. - Easy to check and set - The display gives you an overview of all the important data and events - before the race, during the race and after the race. You can change your settings quickly and get instant feedback without the delay of connecting an external control interface. - Advanced cooling technology - NITRIDE The advanced cooling technology based on an aluminium nitride heat sink specially developed for NITRIDE gives the ESC excellent thermal conductivity and long-term resistance to high temperatures and loads. MOSFET transistors are cooled directly without an additional thermal resistance layer! In the manufacturing process, ELCERAM used very thick layers of special materials such as silver and copper for very low internal resistance and the latest technologies inspired by the advanced power supply systems developed and manufactured by ELCERAM. - For even better cooling, NITRIDE 1/10 G2 has additional aluminium cooling fins and a connector for Intelligent FAN if required under special conditions. - Reverse polarity protection. - Intelligent algorithms for ESC protection. - Dimensions - Despite its many great new features, the NITRIDE 1/10 G2 is very compact and even smaller than Generation 1. Its dimensions are suitable for all types of 1/10 RC cars. In addition, 70% of the weight is on the underside of the ESC, giving your car even more stability! - Easy installation - Installation of the NITRIDE 1/10 is quick and easy - it can be attached to the chassis with an aluminium mounting plate (included) or bolted directly to a suitable location, ideally with good thermal conductivity. For 4.5T and 5.0T motors, we recommend using a passive heatsink or an external fan for a better cooling effect if desired. - In addition, the cover of the ESC with display and buttons can be easily replaced in the event of an accident. - Zero timing (blinky mode) is supported. - External capacitors required (included)

Specifications: Scale: 1:10 Onroad and Offroad, Stock, Open Stock, Modified and other categories Type: Brushless Sensored Waterproof: No Reverse polarity protection: Yes Continuous / peak current: 180 A / 1500 A Input voltage: 2S LiPo Adjustable BEC output voltage: 6.0-7.4 V BEC continuous/peak current: 6 A/12 A Size: W 34 x L 36.5 x H 24 mm Weight: 59 g without cable BEC cable length: 180 mm, grey stripe is negative pole Applications: Sensor-controlled brushless DC motors from 4.5 T