Skip to main content Skip to search Skip to main navigation
Go to homepage

WeiRC Steel Chassis 1,2mm for Xray X4`26 incl. Steel Screw Set

€84.90*

% €139.90* (39.31% saved)
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.
Product number: WEI-SCSET-X426

WeiRC Steel Chassis 1,2mm for Xray X4`26 incl. Steel Screw Set

The high-quality steel chassis from WeiRC is THE tuning alternative for your Xray X4`26. The 1.2 mm thin chassis is heavier than a carbon fibre or aluminium chassis and lowers the centre of gravity of the vehicle enormously. Often better handling and an "easier to drive car" can be the advantage of using a steel chassis.

CONTENTS:
1
x WEI-SC-X426 WeiRC Steel Chassis Xray X4`26 1,2mm
1x WEI-SCS-X426 WeiRC Steel Bolt Set Xray X4`26

Update 27.11.26: To mount the aluminium upstop components on the chassis, a 0.25mm washer must be used. This must be installed between the chassis and the aluminium part. The screw cannot be tightened without the washers. The original screws from Xray must be used (M2.5x5mm). We have added 4 of these required washers to the screw set for one car!

Properties "WeiRC Steel Chassis 1,2mm for Xray X4`26 incl. Steel Screw Set"
Awesomatix Model: A800R / RR
Spare Part Type: Tuning Drittanbieter

WeiRC Steel Chassis 1,2mm for Xray X4`26 incl. Steel Screw Set

Product number: WEI-SCSET-X426

€84.90*

% €139.90* (39.31% saved)
Product Quantity: Enter the desired amount or use the buttons to increase or decrease the quantity.

WeiRC Steel Chassis 1,2mm for Xray X4`26 incl. Steel Screw Set

The high-quality steel chassis from WeiRC is THE tuning alternative for your Xray X4`26. The 1.2 mm thin chassis is heavier than a carbon fibre or aluminium chassis and lowers the centre of gravity of the vehicle enormously. Often better handling and an "easier to drive car" can be the advantage of using a steel chassis.

CONTENTS:
1
x WEI-SC-X426 WeiRC Steel Chassis Xray X4`26 1,2mm
1x WEI-SCS-X426 WeiRC Steel Bolt Set Xray X4`26

Update 27.11.26: To mount the aluminium upstop components on the chassis, a 0.25mm washer must be used. This must be installed between the chassis and the aluminium part. The screw cannot be tightened without the washers. The original screws from Xray must be used (M2.5x5mm). We have added 4 of these required washers to the screw set for one car!

Awesomatix Model: A800R / RR
Spare Part Type: Tuning Drittanbieter
Properties "WeiRC Steel Chassis 1,2mm for Xray X4`26 incl. Steel Screw Set"
Awesomatix Model: A800R / RR
Spare Part Type: Tuning Drittanbieter