Takashima D-13 Titanium Chassis 1.5 mm for Awesomatix A800RR (105g) – Black
Takashima D-13 Titanium Chassis 1.5 mm for Awesomatix A800RR (105g) – Black
This 1.5 mm-thick titanium chassis bridges the gap between carbon and steel, with a very impressive weight of 112 g.
TKSM-240 Awesomatix A800RR 1.5 mm Titanium Chassis Weight: 105 g
The chassis pack does NOT include a 120-degree screw set.
We recommend the TKSM-169 TORX screw set and the TKSM-185 TORX screwdriver
Please read the following information from Takashima D-13:
As the titanium plate is only 1.5 mm thick, it cannot be fitted using standard 90-degree countersunk screws. Our chassis plate must be fitted using M3 120-degree countersunk flat-head screws. (Using screws that are not 120 degrees will enlarge the holes and cause permanent damage to the plate.)
Although you can find this type of screw on the market, we strongly recommend using our factory-made Takashima D-13 screws to achieve the best assembly results.
Our bespoke screws are characterised by the following features:
Each screw specification is manufactured using its own, independent mould. The precision exceeds that of mass-produced screws of the same size and ensures that, once fitted, the screw head sits perfectly flush with the steel plate without protruding, thereby preventing deformation of the plate.
The screws are made of carbon steel with a silver-coated finish and have a strength class of 12.9. The recommended tightening torque for all M3 screws is 0.8 N·m to ensure a longer service life and better resistance to frequent assembly and disassembly.
The depth of the screwdriver engagement has been specially adjusted to ensure that the recess is deep enough for secure tightening, thereby reducing the risk of the screwdriver slipping.
| Schumacher Model: | Mi10 |
|---|---|
| Spare Part Type: | Tuning Drittanbieter |
Takashima D-13 Titanium Chassis 1.5 mm for Awesomatix A800RR (105g) – Black
Takashima D-13 Titanium Chassis 1.5 mm for Awesomatix A800RR (105g) – Black
This 1.5 mm-thick titanium chassis bridges the gap between carbon and steel, with a very impressive weight of 112 g.
TKSM-240 Awesomatix A800RR 1.5 mm Titanium Chassis Weight: 105 g
The chassis pack does NOT include a 120-degree screw set.
We recommend the TKSM-169 TORX screw set and the TKSM-185 TORX screwdriver
Please read the following information from Takashima D-13:
As the titanium plate is only 1.5 mm thick, it cannot be fitted using standard 90-degree countersunk screws. Our chassis plate must be fitted using M3 120-degree countersunk flat-head screws. (Using screws that are not 120 degrees will enlarge the holes and cause permanent damage to the plate.)
Although you can find this type of screw on the market, we strongly recommend using our factory-made Takashima D-13 screws to achieve the best assembly results.
Our bespoke screws are characterised by the following features:
Each screw specification is manufactured using its own, independent mould. The precision exceeds that of mass-produced screws of the same size and ensures that, once fitted, the screw head sits perfectly flush with the steel plate without protruding, thereby preventing deformation of the plate.
The screws are made of carbon steel with a silver-coated finish and have a strength class of 12.9. The recommended tightening torque for all M3 screws is 0.8 N·m to ensure a longer service life and better resistance to frequent assembly and disassembly.
The depth of the screwdriver engagement has been specially adjusted to ensure that the recess is deep enough for secure tightening, thereby reducing the risk of the screwdriver slipping.
| Schumacher Model: | Mi10 |
|---|---|
| Spare Part Type: | Tuning Drittanbieter |
| Schumacher Model: | Mi10 |
|---|---|
| Spare Part Type: | Tuning Drittanbieter |