RC MAKER SP1 1,5mm Aluminum Chassis (1)
Product information "RC MAKER SP1 1,5mm Aluminum Chassis (1)"
RC MAKER product description
Optional 1.5 mm 7075 T6 aluminium chassis for RC MAKER SP1
NOTE: 110-degree screws are required to mount this chassis! The standard 90 degree screws from the kit will NOT fit. You can purchase the screw kit and additional screws HERE.
Our new 1.5mm 7075 T6 chassis has been intensively developed over several months of testing with team riders in different classes and on different surfaces. It has proven to be an excellent compromise that works well on a variety of surfaces, from low grip tarmac to high grip carpet!
Compared to the 2.0 mm aluminium chassis, the 1.5 mm chassis allows more rotation and makes the car freer in corners.
The overall stiffness of the chassis is comparable to that of a hard carbon chassis, but it is 0.75 mm thinner, which significantly reduces the centre of gravity.
Made from 7075 T6 aluminium with black anodising
Weight: 72 g
RCM-SP-2072
Note: This thin aluminium is very difficult to machine flat and every measure has been taken to make it as flat as possible. Each chassis has been individually tested to meet our strict tolerance requirements. This chassis is also more fragile and more susceptible to deformation from impact than the 2.0mm aluminium chassis or the carbon chassis and is therefore not recommended for beginners.
Scope of delivery:
1x 1.5 mm 7075 T6 aluminium chassis
Ergänzende Informationen / Additional information
Verantwortlicher / Responsible
ToniSport GmbH
Füllscheuer 30, 56626 Andernach
GER
https://www.tonisport.de/
info@tonisport.de
Hersteller / Manufacturer
RC Maker
8/16 Jesmond Road, Helensvale, 4212, QLD
AUS
www.rcmaker.com.au
ryan@rcmaker.com.au
 |
ACHTUNG: Nicht für Kinder unter 36 Monaten geeignet wegen verschluckbarer Kleinteile, Erstickungsgefahr. CAUTION: Not suitable for children under 36 months due to small parts that can be swallowed, choking hazard. |
| ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen. CAUTION: Not suitable for children under 14 years of age. Use under the direct supervision of adults. |
Sicherheitshinweise GHS / H-Sätze | Safety instructions / Hazard Statements
- H 315: Verursacht Hautreizungen (Causes skin irritation)
- H 319: Verursacht schwere Augenreizung (Causes severe eye irritation)
- H 335: Kann die Atemwege reizen (May irritate the respiratory tract)
Sicherheitshinweise GHS / P-Sätze | Safety instructions / Precautionary Statements
- P 102: Darf nicht in die Hände von Kindern gelangen. (Keep out of the reach of children.)
- P 261: Einatmen von Staub / Rauch / Gas / Nebel / Dampf / Aerosol vermeiden. (Avoid inhalation of dust / smoke / gas / mist / vapour / aerosol.)
- P 271: Nur im Freien oder in gut belüfteten Räumen verwenden. (Only use outdoors or in well-ventilated rooms.)
- P 280: Schutzhandschuhe / Schutzkleidung / Augenschutz / Gesichtsschutz tragen. (Wear protective gloves / protective clothing / eye protection / face protection.)
- P 305+351+338: Bei Kontakt mit den Augen: Einige Minuten lang behutsam mit Wasser spülen. Vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen (In case of contact with eyes: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing)
- P 312: Bei Unwohlsein Giftinformationszentrum oder Arzt anrufen. (If you feel unwell, call a poison information centre or doctor.)
- P 405: Unter Verschluss aufbewahren. (Store under lock and key.)
- P 501: Inhalt/Behälter … zuführen. (Feed contents/container ....)
Sicherheitshinweise / EUH | Safety instructions / EUH
- EUH 202: Cyanacrylat. Gefahr. Klebt innerhalb von Sekunden Haut und Augenlider zusammen. Darf nicht in die Hände von Kindern gelangen. ()
RC MAKER is the brainchild of Australian touring car driver Ryan Maker. Ryan is a four-time Australian National Modified Touring Car Champion and finished 17th in the 2016 World Championship in Beijing, China. The RC MAKER story began in 2018 and grew and expanded into the store you see today. We are proud to offer all the great brands we resell worldwide, as well as our own products, 95% of which are made in our factory in Melbourne, Australia. Ryan's 16 years of experience in the racing industry guarantees you the best products and the best advice. All the products we develop and distribute, we do so because we believe in them. We have extensive knowledge of every product you see at RC MAKER and will do everything we can to make sure you get the best out of them. Ryan works closely with manufacturers and some of the best riders in the world to develop their world-class products, and sponsors world champion riders like Ronald Völker and Marc Rheinard. We have developed and continue to develop the best products and services for our thousands of customers around the world. Buy with confidence knowing that we will always go the extra mile for you.
Translated with DeepL.com (free version)