MR33 GlueX Sidewall Gluing Tool for Hudy TC Tires (1)
MR33 GlueX – the simplest solution for a perfect glued edge!
Anyone involved in the 1:10 touring car or FWD racing scene will be familiar with the problem: the track offers a particularly high level of grip, and a clean, even adhesive edge becomes a crucial part of the set-up.
Creating a glue edge at the correct height and with a consistent width usually requires a great deal of experience, practice and patience – precisely the things you don’t always have on a stressful race day.
This is where MR33 GlueX comes in.
This ingenious tool from BoomRC makes the precise application of superglue to the tyre sidewall significantly easier, quicker and, above all, more consistent.
HOW GLUEX WORKS
Simply put a little superglue into the GlueX’s glue tray . Then place the tyre in the tray with the outer side or tyre sidewall facing downwards and slowly rotate it in a circle a few times.
As you do so, the rim is guided cleanly over the central guide pin . This keeps the tyre securely in place and prevents it from slipping or wobbling.
When you subsequently lift the tyre out of the GlueX again, there will already be a even and precise adhesive bead on the tyre sidewall. Now just wait a moment until the superglue has dried completely – and you’re done!
Sounds simple? It is.
Numerous practical tests by Marc Rheinard and Simon Lauter have already shown just how much GlueX makes the job easier. The adhesive edge is quick to create, easy to replicate and works reliably even under racing conditions.
Another major advantage: the tyre is placed “upside down” into the adhesive. This prevents the superglue from running over the actual tyre surface so easily – a problem that can quickly arise with other methods.
EASILY ADJUST THE HEIGHT OF THE GLUE BEAD
The adhesive edge shouldn’t be at the same height for every setup. That’s exactly why there are various optional adhesive rings.
The 0 mm adhesive ring corresponds to the standard dimension and is the perfect starting point. In addition, adhesive rings are available with +1 mm and +2 mm are also available.
Simply change the adhesive ring and you can adjust the adhesive edge to be 1 or 2 mm higher on the tyre sidewall.
This allows you to quickly and easily adjust the position of the adhesive edge to suit different track conditions and set-ups.
A QUICK TIP FOR GETTING STARTED
The GlueX adhesive tray is a 3D representation of the tyre sidewall , enabling a particularly precise adhesive edge.
Nevertheless, we recommend carrying out your first attempts using a few second-hand tyres. This will help you quickly get a feel for how much superglue to put in the tray and how quickly the tyre should be rotated within it.
After a few attempts, you’ll realise just how easy and consistent it is to create perfect bonding edges with GlueX.
REPLACEMENT GLUE RINGS
Of course, the glue rings are also available individually as spare parts.
With one glue ring, you can make at least 15 complete tyre sets be fitted with an adhesive edge. Depending on the application and the amount of adhesive used, even more tyre sets may be possible.
If the adhesive ring needs replacing at some point, handy packs of three are available at a fair price.
SCOPE OF DELIVERY
1× MR33 GlueX base station – Item no. 602010
2× 0 mm adhesive ring for HUDY TC tyres – Item No. 602510
2× Adhesive ring +1 mm for HUDY TC tyres – Item No. 602512
2× Adhesive ring +2 mm for HUDY TC tyres – Item No. 602514
MR33 GlueX – the perfect glue bead, stress-free.
Fast, precise and consistent – exactly what you need on race day.
Ergänzende Informationen / Additional information
Verantwortlicher / Responsible
ToniSport GmbH
Füllscheuer 30, 56626 Andernach
GER
https://www.tonisport.de/
info@tonisport.de
Hersteller / Manufacturer
ToniSport GmbH
Füllscheuer 30, 56626 Andernach
GER
https://www.tonisport.de/
info@tonisport.de
![]() |
ACHTUNG: Nicht für Kinder unter 36 Monaten geeignet wegen verschluckbarer Kleinteile, Erstickungsgefahr. CAUTION: Not suitable for children under 36 months due to small parts that can be swallowed, choking hazard. |
| ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen. CAUTION: Not suitable for children under 14 years of age. Use under the direct supervision of adults. |
Sicherheitshinweise GHS / H-Sätze | Safety instructions / Hazard Statements
- H 315: Verursacht Hautreizungen (Causes skin irritation)
- H 319: Verursacht schwere Augenreizung (Causes severe eye irritation)
- H 335: Kann die Atemwege reizen (May irritate the respiratory tract)
Sicherheitshinweise GHS / P-Sätze | Safety instructions / Precautionary Statements
- P 102: Darf nicht in die Hände von Kindern gelangen. (Keep out of the reach of children.)
- P 261: Einatmen von Staub / Rauch / Gas / Nebel / Dampf / Aerosol vermeiden. (Avoid inhalation of dust / smoke / gas / mist / vapour / aerosol.)
- P 271: Nur im Freien oder in gut belüfteten Räumen verwenden. (Only use outdoors or in well-ventilated rooms.)
- P 280: Schutzhandschuhe / Schutzkleidung / Augenschutz / Gesichtsschutz tragen. (Wear protective gloves / protective clothing / eye protection / face protection.)
- P 305+351+338: Bei Kontakt mit den Augen: Einige Minuten lang behutsam mit Wasser spülen. Vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen (In case of contact with eyes: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing)
- P 312: Bei Unwohlsein Giftinformationszentrum oder Arzt anrufen. (If you feel unwell, call a poison information centre or doctor.)
- P 405: Unter Verschluss aufbewahren. (Store under lock and key.)
- P 501: Inhalt/Behälter … zuführen. (Feed contents/container ....)
Sicherheitshinweise / EUH | Safety instructions / EUH
- EUH 202: Cyanacrylat. Gefahr. Klebt innerhalb von Sekunden Haut und Augenlider zusammen. Darf nicht in die Hände von Kindern gelangen. ()
| Tire Accessories: | Reifen Kleben |
|---|
MR33 GlueX Sidewall Gluing Tool for Hudy TC Tires (1)
€34.90
Currently unavailable
MR33 GlueX Sidewall Gluing Tool for Hudy TC Tires (1)
MR33 GlueX – the simplest solution for a perfect glued edge!
Anyone involved in the 1:10 touring car or FWD racing scene will be familiar with the problem: the track offers a particularly high level of grip, and a clean, even adhesive edge becomes a crucial part of the set-up.
Creating a glue edge at the correct height and with a consistent width usually requires a great deal of experience, practice and patience – precisely the things you don’t always have on a stressful race day.
This is where MR33 GlueX comes in.
This ingenious tool from BoomRC makes the precise application of superglue to the tyre sidewall significantly easier, quicker and, above all, more consistent.
HOW GLUEX WORKS
Simply put a little superglue into the GlueX’s glue tray . Then place the tyre in the tray with the outer side or tyre sidewall facing downwards and slowly rotate it in a circle a few times.
As you do so, the rim is guided cleanly over the central guide pin . This keeps the tyre securely in place and prevents it from slipping or wobbling.
When you subsequently lift the tyre out of the GlueX again, there will already be a even and precise adhesive bead on the tyre sidewall. Now just wait a moment until the superglue has dried completely – and you’re done!
Sounds simple? It is.
Numerous practical tests by Marc Rheinard and Simon Lauter have already shown just how much GlueX makes the job easier. The adhesive edge is quick to create, easy to replicate and works reliably even under racing conditions.
Another major advantage: the tyre is placed “upside down” into the adhesive. This prevents the superglue from running over the actual tyre surface so easily – a problem that can quickly arise with other methods.
EASILY ADJUST THE HEIGHT OF THE GLUE BEAD
The adhesive edge shouldn’t be at the same height for every setup. That’s exactly why there are various optional adhesive rings.
The 0 mm adhesive ring corresponds to the standard dimension and is the perfect starting point. In addition, adhesive rings are available with +1 mm and +2 mm are also available.
Simply change the adhesive ring and you can adjust the adhesive edge to be 1 or 2 mm higher on the tyre sidewall.
This allows you to quickly and easily adjust the position of the adhesive edge to suit different track conditions and set-ups.
A QUICK TIP FOR GETTING STARTED
The GlueX adhesive tray is a 3D representation of the tyre sidewall , enabling a particularly precise adhesive edge.
Nevertheless, we recommend carrying out your first attempts using a few second-hand tyres. This will help you quickly get a feel for how much superglue to put in the tray and how quickly the tyre should be rotated within it.
After a few attempts, you’ll realise just how easy and consistent it is to create perfect bonding edges with GlueX.
REPLACEMENT GLUE RINGS
Of course, the glue rings are also available individually as spare parts.
With one glue ring, you can make at least 15 complete tyre sets be fitted with an adhesive edge. Depending on the application and the amount of adhesive used, even more tyre sets may be possible.
If the adhesive ring needs replacing at some point, handy packs of three are available at a fair price.
SCOPE OF DELIVERY
1× MR33 GlueX base station – Item no. 602010
2× 0 mm adhesive ring for HUDY TC tyres – Item No. 602510
2× Adhesive ring +1 mm for HUDY TC tyres – Item No. 602512
2× Adhesive ring +2 mm for HUDY TC tyres – Item No. 602514
MR33 GlueX – the perfect glue bead, stress-free.
Fast, precise and consistent – exactly what you need on race day.
| Tire Accessories: | Reifen Kleben |
|---|
Ergänzende Informationen / Additional information
Verantwortlicher / Responsible
ToniSport GmbH
Füllscheuer 30, 56626 Andernach
GER
https://www.tonisport.de/
info@tonisport.de
Hersteller / Manufacturer
ToniSport GmbH
Füllscheuer 30, 56626 Andernach
GER
https://www.tonisport.de/
info@tonisport.de
![]() |
ACHTUNG: Nicht für Kinder unter 36 Monaten geeignet wegen verschluckbarer Kleinteile, Erstickungsgefahr. CAUTION: Not suitable for children under 36 months due to small parts that can be swallowed, choking hazard. |
| ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen. CAUTION: Not suitable for children under 14 years of age. Use under the direct supervision of adults. |
Sicherheitshinweise GHS / H-Sätze | Safety instructions / Hazard Statements
- H 315: Verursacht Hautreizungen (Causes skin irritation)
- H 319: Verursacht schwere Augenreizung (Causes severe eye irritation)
- H 335: Kann die Atemwege reizen (May irritate the respiratory tract)
Sicherheitshinweise GHS / P-Sätze | Safety instructions / Precautionary Statements
- P 102: Darf nicht in die Hände von Kindern gelangen. (Keep out of the reach of children.)
- P 261: Einatmen von Staub / Rauch / Gas / Nebel / Dampf / Aerosol vermeiden. (Avoid inhalation of dust / smoke / gas / mist / vapour / aerosol.)
- P 271: Nur im Freien oder in gut belüfteten Räumen verwenden. (Only use outdoors or in well-ventilated rooms.)
- P 280: Schutzhandschuhe / Schutzkleidung / Augenschutz / Gesichtsschutz tragen. (Wear protective gloves / protective clothing / eye protection / face protection.)
- P 305+351+338: Bei Kontakt mit den Augen: Einige Minuten lang behutsam mit Wasser spülen. Vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen (In case of contact with eyes: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing)
- P 312: Bei Unwohlsein Giftinformationszentrum oder Arzt anrufen. (If you feel unwell, call a poison information centre or doctor.)
- P 405: Unter Verschluss aufbewahren. (Store under lock and key.)
- P 501: Inhalt/Behälter … zuführen. (Feed contents/container ....)
Sicherheitshinweise / EUH | Safety instructions / EUH
- EUH 202: Cyanacrylat. Gefahr. Klebt innerhalb von Sekunden Haut und Augenlider zusammen. Darf nicht in die Hände von Kindern gelangen. ()
| Tire Accessories: | Reifen Kleben |
|---|
