MR33 3D Junsi Charger Mount - Base Part
Product information "MR33 3D Junsi Charger Mount - Base Part"
This 3D printed base part is a spare part for the very popular charger brackets from MR33 (made by BOOM RC).
It is part of the charger brackets MR33-BCM, MR33-BCM-X6, and MR33-BCM-X8.
What can it be used for?
Firstly, of course, as a spare part if the original part is damaged during transportation, for example!
However, many RC model builders also have a second power supply unit, for example.
This spare part can be used to conveniently equip another power supply unit and then plug your existing charger (which is already equipped with the BCM system) onto the second power supply unit.
Contents: 3D printed base part (for gluing onto a power supply unit), suitable for all MR33-BCM systems!
Info: The chargers and power supply units shown are not included in the scope of delivery!
Ergänzende Informationen / Additional information
Verantwortlicher / Responsible
ToniSport GmbH
Füllscheuer 30, 56626 Andernach
GER
https://www.tonisport.de/
info@tonisport.de
Hersteller / Manufacturer
ToniSport GmbH
Füllscheuer 30, 56626 Andernach
GER
https://www.tonisport.de/
info@tonisport.de
 |
ACHTUNG: Nicht für Kinder unter 36 Monaten geeignet wegen verschluckbarer Kleinteile, Erstickungsgefahr. CAUTION: Not suitable for children under 36 months due to small parts that can be swallowed, choking hazard. |
| ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen. CAUTION: Not suitable for children under 14 years of age. Use under the direct supervision of adults. |
Sicherheitshinweise GHS / H-Sätze | Safety instructions / Hazard Statements
- H 315: Verursacht Hautreizungen (Causes skin irritation)
- H 319: Verursacht schwere Augenreizung (Causes severe eye irritation)
- H 335: Kann die Atemwege reizen (May irritate the respiratory tract)
Sicherheitshinweise GHS / P-Sätze | Safety instructions / Precautionary Statements
- P 102: Darf nicht in die Hände von Kindern gelangen. (Keep out of the reach of children.)
- P 261: Einatmen von Staub / Rauch / Gas / Nebel / Dampf / Aerosol vermeiden. (Avoid inhalation of dust / smoke / gas / mist / vapour / aerosol.)
- P 271: Nur im Freien oder in gut belüfteten Räumen verwenden. (Only use outdoors or in well-ventilated rooms.)
- P 280: Schutzhandschuhe / Schutzkleidung / Augenschutz / Gesichtsschutz tragen. (Wear protective gloves / protective clothing / eye protection / face protection.)
- P 305+351+338: Bei Kontakt mit den Augen: Einige Minuten lang behutsam mit Wasser spülen. Vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen (In case of contact with eyes: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing)
- P 312: Bei Unwohlsein Giftinformationszentrum oder Arzt anrufen. (If you feel unwell, call a poison information centre or doctor.)
- P 405: Unter Verschluss aufbewahren. (Store under lock and key.)
- P 501: Inhalt/Behälter … zuführen. (Feed contents/container ....)
Sicherheitshinweise / EUH | Safety instructions / EUH
- EUH 202: Cyanacrylat. Gefahr. Klebt innerhalb von Sekunden Haut und Augenlider zusammen. Darf nicht in die Hände von Kindern gelangen. ()
| Electronics: | Ladegeräte, Netzteile |
|---|
Behind the MR33 brand is multiple IFMAR World Champion Marc Rheinard. He founded the MR33 brand after winning his second world championship title in Thailand in 2008 with the registration number 33. Since then, MR33's assortment has grown year after year. One can find in the assortment of MR33 a wide range, all around the competition oriented RC car sport. Offered are tools such as pliers, screwdrivers, Allen wrenches and tool stands. In addition, MR33 also has chemicals such as superglue, tire additives, activator spray, damper oil, differential oil and greases in its product portfolio. Tuning and spare parts like wishbones, topdecks, silicone wires, charging leads, sensor wires and tungsten weights complete the profile of MR33.