MKS product description

 Powerful and ultra-fast, programmable digital standard servo with low profile, brushless motor, metal gearbox and double ball-bearing output shaft, ideal for 1:10 and 1:8 RC cars. The servo is housed in an aluminum case with a ribbed center section that ensures perfect cooling even under very high loads.

Increased supply voltage 4.8-7.4 V (nominal voltage), operating voltage 4.8-8.4 V.

With the USB programmer/interface for DSP-1 servos and the PC operating program, you can program a wide range of servo parameters:

STANDARD FUNCTIONS

• Dead band (dead zone): The signal value can change under certain circumstances without affecting the position of the output shaft/servo lever. MKS default value = 1μs or 1.2μs
• Lock (closing): Setting the servo behavior when it does not receive a control signal - Holds the position corresponding to the last signal received / The motor is free, the servo does not hold a position.
• Max. Duty (Max. power): The motor power is limited by this value - it limits the maximum power of the servo motor.
• Pulse Lower (Min. pulse width): The lower limit of the control pulse width and the corresponding size of the servo deflection are limited by this value.
• Neutral (Neutral position): Sets the width of the control pulses in the neutral position/center position of the servo.
• Pulse Upper (max. pulse width): The upper limit of the control pulse width and the corresponding size of the servo deflection are limited by this value.
• Boost (start-up): Motor power when starting from a standstill. The higher the value, the stronger the motor starts.

FEATURES

Servo size: Standard

Servo type: Digital

Programmable: Yes

Actuating force with 4.8V [kg∙cm]: 9

Actuating force with 6.0V [kg∙cm]: 12

Actuating force with 7.4V [kg∙cm]: 15

Speed at 4.8V [s/60st.]: 0.09

Speed at 6.0V [s/60st.]: 0.073

Speed at 7.4V [s/60st.]: 0.059

Control pulse width in the neutral position [µs]: 1520

Frame frequency [Hz]: 333

Dead zone [ms]: 0.001

Servo gear: Metal

Ball bearing: 2×

High voltage: Yes

Power supply [V]: 4.8 - 8.4

Length [mm]: 40.5

Width [mm]: 20.5

Height [mm]: 25.4

Weight [g]: 58.5

Intended for: Aircraft, road cars, off-road vehicles