INOV8 Product Description

We are pleased to present our 3DX body mount spacers, which have been specially developed for the new Avalon Vortex body. They are 3D-printed from robust and lightweight ASA material to ensure maximum durability with minimum weight – a crucial factor for this vital component of your bodywork.

As the wing struts on the Avalon Vortex are so high, we had to find a solution to provide sufficient length on the body mounts so that the body can be positioned at the correct height. Rather than producing completely new carbon extensions for a single body, we decided to develop these spacers, which can be used with the original extensions that everyone already owns!

We have developed two versions: 10 mm and 15 mm. The 10 mm version is intended more for drivers with a lower rake angle (typically in the Stock class), whilst the 15 mm version is designed for a greater rake angle (typically in the Modified class). They can be reused from one body to another!

This spacer ring is designed exclusively for use with the INOV8 X-Lite body mount, as it fits perfectly onto the top of the mount, ensuring that everything remains aligned.

Note: To use this spacer ring, you will need a bolt that is 10 or 15 mm longer than usual. Therefore, please ensure you have a bolt of this length to hand for assembly. We recommend a titanium screw to keep the weight as low as possible, whilst still being strong enough to provide adequate support for the body.

Contents: 2x 3DX X-Lite body mount spacers (10 or 15 mm) – sufficient for 1 body.

Fitting: Fit the spacer above the body mount, ensuring the arrow points towards the front of the body. The underside of the spacer should sit flush against the top of your body mount.