C01B-RSL Titanium Chassis

: This version of the chassis is made from 1.5 mm-thick titanium of the highest quality and weighs approx. 108 g.

The new C01B-RSL offers an excellent alternative to the heavier C01B-RS steel chassis (~140 g) in Blinky classes, allowing you to get closer to the minimum weight at which large batteries (~over 290 g) can offer a performance advantage.

Furthermore, this chassis has demonstrated remarkable performance in the Modified class on US and European indoor tracks, with tests showing improved cornering speed and traction when driving forwards.

Six recesses for the optional fitting of TW5 tungsten weights (not included) allow the total weight of the chassis to be increased to approx. 140 g.

INFO :

This chassis requires specially milled screws --> SS-SC or SS-SC2 (not included).

ST237 damper spacers (4 pieces) or SH0.5 mm washers (8 pieces) should be used under the D3/D4 dampers (not included).

The lower rammer P14-1-RS is recommended for use with the lower deck C01B-RSL (not included).

AM278-EVO partition walls are required (not included).

Some C01B-RSL chassis may show machining marks, whilst others may not.

Contents of delivery:

:

1 x

C01B-RSL

Note on flatness:

: Each chassis we manufacture is individually tested to ensure it meets our strict flatness tolerances (≤ 0.4 mm).

Measurements are carried out on a certified flat surface under the chassis’s own weight using calibrated measuring probes.

If a chassis meets these specifications, it is considered to be within tolerance and cannot be recognised as defective.

Claims based on unverified methods or improper test conditions will not be accepted.

Translated with DeepL.com (free version)