STICKERED Junsi iCharger 458 Duo Charger
Product information "STICKERED Junsi iCharger 458 Duo Charger"
INFO: This charger is NEW and unused. It is delivered incl. OVP and all accessories. We only used the charger to try out one of our new MR33 sticker skins. The skin is in the MR33 Cayote design and was our first attempt, so to speak. If you wish, you can remove the stickers from the device without leaving any residue! For this reason, we have minimally reduced the price of the charger!
With the iCharger 458DUO, the renowned manufacturer Junsi has completely modernised the technology of the well-known 308DUO charger.
The new 458DUO charger combines the advantages of the well-known Junsi iCharger 308DUO with the latest technology and therefore significantly more power and new functions.
The two charging outputs are equipped with high-current-resistant XT90 plugs to transfer the power permanently.
The technical data is impressive, 2200W charging power (from >40V), 1-8s LiXx cells and up to 45Ampere charging current are also sufficient for large batteries with high capacity. Of course, all other battery types such as LiHV, LiIo, NiZn, PB, NiCd or NiMh batteries can also be charged.
The discharge power is 140 watts in total (80 watts per output if only one output is used), but can be increased to up to 2200 watts using an external load (discharge resistor). Of course, the iCharger 458DUO is also capable of regenerative charging. The battery capacity is fed back into the supply battery from a full flight battery, for example.
The balancer current of 4 amps in total (2A per output) always ensures perfectly equalised cell voltages.
A USB-C PD port for charging smartphones etc. (5V/3A, 9V/2A, 12V/1.5A) or for software updates is also built in. The micro SD slot can be used to log data, but also for future updates.
A new feature is the "Digital Power" function, where one output can be used as a stabilised power supply. The output voltage can be set from 2V to 32V, the current from 1A-45A (please note that an appropriate power supply must be available for this! )
Also integrated is a servo tester, please note that an external power supply is required!
The menu navigation is almost identical to the well-known Junsi iCharger 308DUO, 406 DUO or 4010DUO.
A 2.8" IPS LCD display ensures good readability even in low light.
Instructions in English are included with the charger in the form of a CD, the German version can be downloaded from our website.
All Junsi chargers in the X and DUO series have been developed and approved for use in model making. Industrial use is not intended and therefore not permitted! All Junsi chargers may only be operated with power supply units developed for modelling! AGM batteries may not be charged in the PB programme!
INFO: Junsi chargers are always supplied WITHOUT charging cable (XT90 connection).
| Charging current adjustable per output: | 0.05A - 45A |
| Charging current adjustable in synchronous mode: | 0.05A - 70A |
| Input voltage: | 10V - 49V DC |
| Width (mm): | 117,8 |
| Discharge power Max. in synchronous mode: | 140W |
| Max. Voltage lead batteries: | 15 (2 - 30V) |
| Max. charging power at one output: | 1600W |
| External high current discharge asynchronous: | 1600W |
| Length (mm): | 171,2 |
| Balancer accuracy (depending on setting): | 1mV |
| Balancer equalising current per output: | 2 |
| Max. Max. power: | 22000W |
| External high current discharge synchronous: | 2200W |
| Charging power max syncron: | 2200W |
| Max. Discharge power: | 2200W |
| Max. Number of NiCd/NiMH batteries: | 25 |
| Height (mm): | 57,5 |
| Max. Charging current: | 70A |
| Input current limit: | 70A |
| Discharge power per output: | 80W |
| Weight (g): | 930 |
| Micro SD card slot: | Yes |
| Integrated power supply: | No |
Ergänzende Informationen / Additional information
Verantwortlicher / Responsible
SieBra GmbH & Co. KG
Christian-Liebrecht-Straße 6, 58739 Wickede
DE
https://www.rc-dome.de/
info@rc-dome.de
Hersteller / Manufacturer
Shenzhen New Junsi Electronic Co.,Ltd (JUNSI)
5th Floor, Yutian Building, No. 18 Yangtian RD, Xin'an Street, Bao'An District, Shenzhen, Guangdong, PR
CN
sales01@szisd.com
 |
ACHTUNG: Nicht für Kinder unter 36 Monaten geeignet wegen verschluckbarer Kleinteile, Erstickungsgefahr. CAUTION: Not suitable for children under 36 months due to small parts that can be swallowed, choking hazard. |
| ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen. CAUTION: Not suitable for children under 14 years of age. Use under the direct supervision of adults. |
| Electronics: | Ladegeräte |
|---|
Junsi iCharger - High-end chargers for RC modelling
Junsi iCharger is one of the leading brands for high-performance chargers in RC modelling, specially developed for LiPo, HV, LiFe and NiMH batteries. Thanks to high charging performance, precise monitoring and first-class workmanship, iCharger devices are the first choice for ambitious hobbyists and professional RC racers.
The chargers are characterised by their compact design, precise cell balancing and flexible setting options, so that both beginners and experienced pilots can charge their batteries quickly, safely and efficiently. Junsi iCharger systems can be ideally expanded with optional power supply units and balancer boards.
In our shop you will find:
-
Junsi iCharger chargers for LiPo, HV, LiFe and NiMH
-
Power supply units, balancer boards and adapters
-
High-power chargers for racetrack and workshop use
-
Accessories for professional battery management
With Junsi iCharger you get the latest charging technology and maximum reliability, whether for hobby use or in international RC racing. Order your Junsi charger online now and benefit from fast delivery and expert support.
STICKERED Junsi iCharger 458 Duo Charger
Product information "STICKERED Junsi iCharger 458 Duo Charger"
INFO: This charger is NEW and unused. It is delivered incl. OVP and all accessories. We only used the charger to try out one of our new MR33 sticker skins. The skin is in the MR33 Cayote design and was our first attempt, so to speak. If you wish, you can remove the stickers from the device without leaving any residue! For this reason, we have minimally reduced the price of the charger!
With the iCharger 458DUO, the renowned manufacturer Junsi has completely modernised the technology of the well-known 308DUO charger.
The new 458DUO charger combines the advantages of the well-known Junsi iCharger 308DUO with the latest technology and therefore significantly more power and new functions.
The two charging outputs are equipped with high-current-resistant XT90 plugs to transfer the power permanently.
The technical data is impressive, 2200W charging power (from >40V), 1-8s LiXx cells and up to 45Ampere charging current are also sufficient for large batteries with high capacity. Of course, all other battery types such as LiHV, LiIo, NiZn, PB, NiCd or NiMh batteries can also be charged.
The discharge power is 140 watts in total (80 watts per output if only one output is used), but can be increased to up to 2200 watts using an external load (discharge resistor). Of course, the iCharger 458DUO is also capable of regenerative charging. The battery capacity is fed back into the supply battery from a full flight battery, for example.
The balancer current of 4 amps in total (2A per output) always ensures perfectly equalised cell voltages.
A USB-C PD port for charging smartphones etc. (5V/3A, 9V/2A, 12V/1.5A) or for software updates is also built in. The micro SD slot can be used to log data, but also for future updates.
A new feature is the "Digital Power" function, where one output can be used as a stabilised power supply. The output voltage can be set from 2V to 32V, the current from 1A-45A (please note that an appropriate power supply must be available for this! )
Also integrated is a servo tester, please note that an external power supply is required!
The menu navigation is almost identical to the well-known Junsi iCharger 308DUO, 406 DUO or 4010DUO.
A 2.8" IPS LCD display ensures good readability even in low light.
Instructions in English are included with the charger in the form of a CD, the German version can be downloaded from our website.
All Junsi chargers in the X and DUO series have been developed and approved for use in model making. Industrial use is not intended and therefore not permitted! All Junsi chargers may only be operated with power supply units developed for modelling! AGM batteries may not be charged in the PB programme!
INFO: Junsi chargers are always supplied WITHOUT charging cable (XT90 connection).
| Charging current adjustable per output: | 0.05A - 45A |
| Charging current adjustable in synchronous mode: | 0.05A - 70A |
| Input voltage: | 10V - 49V DC |
| Width (mm): | 117,8 |
| Discharge power Max. in synchronous mode: | 140W |
| Max. Voltage lead batteries: | 15 (2 - 30V) |
| Max. charging power at one output: | 1600W |
| External high current discharge asynchronous: | 1600W |
| Length (mm): | 171,2 |
| Balancer accuracy (depending on setting): | 1mV |
| Balancer equalising current per output: | 2 |
| Max. Max. power: | 22000W |
| External high current discharge synchronous: | 2200W |
| Charging power max syncron: | 2200W |
| Max. Discharge power: | 2200W |
| Max. Number of NiCd/NiMH batteries: | 25 |
| Height (mm): | 57,5 |
| Max. Charging current: | 70A |
| Input current limit: | 70A |
| Discharge power per output: | 80W |
| Weight (g): | 930 |
| Micro SD card slot: | Yes |
| Integrated power supply: | No |
| Electronics: | Ladegeräte |
|---|
Ergänzende Informationen / Additional information
Verantwortlicher / Responsible
SieBra GmbH & Co. KG
Christian-Liebrecht-Straße 6, 58739 Wickede
DE
https://www.rc-dome.de/
info@rc-dome.de
Hersteller / Manufacturer
Shenzhen New Junsi Electronic Co.,Ltd (JUNSI)
5th Floor, Yutian Building, No. 18 Yangtian RD, Xin'an Street, Bao'An District, Shenzhen, Guangdong, PR
CN
sales01@szisd.com
|
ACHTUNG: Nicht für Kinder unter 36 Monaten geeignet wegen verschluckbarer Kleinteile, Erstickungsgefahr. CAUTION: Not suitable for children under 36 months due to small parts that can be swallowed, choking hazard. |
| ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen. CAUTION: Not suitable for children under 14 years of age. Use under the direct supervision of adults. |
| Electronics: | Ladegeräte |
|---|
Junsi iCharger - High-end chargers for RC modelling
Junsi iCharger is one of the leading brands for high-performance chargers in RC modelling, specially developed for LiPo, HV, LiFe and NiMH batteries. Thanks to high charging performance, precise monitoring and first-class workmanship, iCharger devices are the first choice for ambitious hobbyists and professional RC racers.
The chargers are characterised by their compact design, precise cell balancing and flexible setting options, so that both beginners and experienced pilots can charge their batteries quickly, safely and efficiently. Junsi iCharger systems can be ideally expanded with optional power supply units and balancer boards.
In our shop you will find:
-
Junsi iCharger chargers for LiPo, HV, LiFe and NiMH
-
Power supply units, balancer boards and adapters
-
High-power chargers for racetrack and workshop use
-
Accessories for professional battery management
With Junsi iCharger you get the latest charging technology and maximum reliability, whether for hobby use or in international RC racing. Order your Junsi charger online now and benefit from fast delivery and expert support.