Product information "RC MAKER Tweak Stick PRO"
RC Maker Carbon Tweak Stick PRO.
Important tool for tweaking your onroad RC touring car.
For the Tweak Stick you need the matching end plates.
You can also find these for various vehicles from RC Maker (RCM-TSP-A800R)
RC Maker Product Description:
Introducing our brand new Carbon Tweak Stick Pro!
The new Tweak Stick Pro Stick itself has some cool features that work well with the new Tweak Stick Pro End Plates and also provide access to the center motor mount screws, which was not possible with the original Tweak Stick. The new Tweak Stick Pro End Plates work great with this new stick and are sold separately.
The Tweak Stick Pro features machined slots for access to the motor mount bolts for all chassis on the market, so you can tighten them while applying pressure to the stick. There are also recesses machined into both ends so you can always attach and tighten your end plates nice and square to the stick (so the slots are square to the chassis)! Press the control stick firmly onto a flat surface before tightening the grub screws, and make sure that both ends sit flat and without canting.
Therefore, we recommend that you first tighten one of the two grub screws to square the stick and end plates, and then adjust the second screw to the perfect position for your chassis and tighten it on a flat surface.
The tweak stick end plates are not included, this is for the stick only. You will need the end plates (original or Pro versions) to use this product!
Ergänzende Informationen / Additional information
Verantwortlicher / Responsible
ToniSport GmbH
Füllscheuer 30, 56626 Andernach
GER
https://www.tonisport.de/
info@tonisport.de
Hersteller / Manufacturer
RC Maker
8/16 Jesmond Road, Helensvale, 4212, QLD
AUS
www.rcmaker.com.au
ryan@rcmaker.com.au
 |
ACHTUNG: Nicht für Kinder unter 36 Monaten geeignet wegen verschluckbarer Kleinteile, Erstickungsgefahr. CAUTION: Not suitable for children under 36 months due to small parts that can be swallowed, choking hazard. |
| ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen. CAUTION: Not suitable for children under 14 years of age. Use under the direct supervision of adults. |
Sicherheitshinweise GHS / H-Sätze | Safety instructions / Hazard Statements
- H 315: Verursacht Hautreizungen (Causes skin irritation)
- H 319: Verursacht schwere Augenreizung (Causes severe eye irritation)
- H 335: Kann die Atemwege reizen (May irritate the respiratory tract)
Sicherheitshinweise GHS / P-Sätze | Safety instructions / Precautionary Statements
- P 102: Darf nicht in die Hände von Kindern gelangen. (Keep out of the reach of children.)
- P 261: Einatmen von Staub / Rauch / Gas / Nebel / Dampf / Aerosol vermeiden. (Avoid inhalation of dust / smoke / gas / mist / vapour / aerosol.)
- P 271: Nur im Freien oder in gut belüfteten Räumen verwenden. (Only use outdoors or in well-ventilated rooms.)
- P 280: Schutzhandschuhe / Schutzkleidung / Augenschutz / Gesichtsschutz tragen. (Wear protective gloves / protective clothing / eye protection / face protection.)
- P 305+351+338: Bei Kontakt mit den Augen: Einige Minuten lang behutsam mit Wasser spülen. Vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen (In case of contact with eyes: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing)
- P 312: Bei Unwohlsein Giftinformationszentrum oder Arzt anrufen. (If you feel unwell, call a poison information centre or doctor.)
- P 405: Unter Verschluss aufbewahren. (Store under lock and key.)
- P 501: Inhalt/Behälter … zuführen. (Feed contents/container ....)
Sicherheitshinweise / EUH | Safety instructions / EUH
- EUH 202: Cyanacrylat. Gefahr. Klebt innerhalb von Sekunden Haut und Augenlider zusammen. Darf nicht in die Hände von Kindern gelangen. ()
| Setup Tools: | Tweak Werkzeug / Stationen |
|---|
RC MAKER is the brainchild of Australian touring car driver Ryan Maker. Ryan is a four-time Australian National Modified Touring Car Champion and finished 17th in the 2016 World Championship in Beijing, China. The RC MAKER story began in 2018 and grew and expanded into the store you see today. We are proud to offer all the great brands we resell worldwide, as well as our own products, 95% of which are made in our factory in Melbourne, Australia. Ryan's 16 years of experience in the racing industry guarantees you the best products and the best advice. All the products we develop and distribute, we do so because we believe in them. We have extensive knowledge of every product you see at RC MAKER and will do everything we can to make sure you get the best out of them. Ryan works closely with manufacturers and some of the best riders in the world to develop their world-class products, and sponsors world champion riders like Ronald Völker and Marc Rheinard. We have developed and continue to develop the best products and services for our thousands of customers around the world. Buy with confidence knowing that we will always go the extra mile for you.
Translated with DeepL.com (free version)