RC MAKER Flexible Carbon Anti Tuck Stiffener 1:10 Touring Car for Pro Body Mounts
Product information "RC MAKER Flexible Carbon Anti Tuck Stiffener 1:10 Touring Car for Pro Body Mounts"
Introducing our 3D Pro Carbon Ultra-Lite Flexible Anti-Tuck Stiffener Set for Pro Horizontal Tail Post Mounts
How good is a hard, close race...? until you get a body tuck. With our new ultra-lightweight, durable solution, body tucks are a thing of the past!
These rear fender stiffeners combine very thin carbon rods with the latest 3D printing technology to achieve a feather-light weight of only 1g each! The best part... they attach directly to our Horizontal Rear Post Body Mounts Pro! Simply screw them into the bottom of the empty hole in the HRP Pro, apply the double sided adhesive dots and remove the adhesive backing. Attach them to the rear fender, at least a few millimeters from the wheel well.
This is especially handy these days as bodies are lighter and mounted further forward, leaving little material behind the rear wheel well. This material is often very flexible and can very easily be trapped under the rear wheel.
The plastic parts are printed at a very high resolution and with some of the highest quality filaments on the market to make them suitable for the job. The lower part is printed from a flexible material that puts less pressure on the stock in a crash and conforms to the body while seamlessly attaching with the included tape.
They work with all bodies equipped with our Horizontal Rear Post Body Mounts Pro!
Installation instructions included in the photos
Features:
- Ultra lightweight at only 1 g per side
- Integrates seamlessly with our Horizontal Rear Post Body Mounts Pro
- Significantly increases the stiffness of the Lexan behind the rear wheel well to prevent body bowing
- Fits all popular body styles on the market
- High quality 3D printed parts with carbon fiber rod construction
- Pre-assembled and includes all parts needed for installation
- Tested by our team drivers for performance and durability
Ergänzende Informationen / Additional information
Verantwortlicher / Responsible
ToniSport GmbH
Füllscheuer 30, 56626 Andernach
GER
https://www.tonisport.de/
info@tonisport.de
Hersteller / Manufacturer
RC Maker
8/16 Jesmond Road, Helensvale, 4212, QLD
AUS
www.rcmaker.com.au
ryan@rcmaker.com.au
 |
ACHTUNG: Nicht für Kinder unter 36 Monaten geeignet wegen verschluckbarer Kleinteile, Erstickungsgefahr. CAUTION: Not suitable for children under 36 months due to small parts that can be swallowed, choking hazard. |
| ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen. CAUTION: Not suitable for children under 14 years of age. Use under the direct supervision of adults. |
Sicherheitshinweise GHS / H-Sätze | Safety instructions / Hazard Statements
- H 315: Verursacht Hautreizungen (Causes skin irritation)
- H 319: Verursacht schwere Augenreizung (Causes severe eye irritation)
- H 335: Kann die Atemwege reizen (May irritate the respiratory tract)
Sicherheitshinweise GHS / P-Sätze | Safety instructions / Precautionary Statements
- P 102: Darf nicht in die Hände von Kindern gelangen. (Keep out of the reach of children.)
- P 261: Einatmen von Staub / Rauch / Gas / Nebel / Dampf / Aerosol vermeiden. (Avoid inhalation of dust / smoke / gas / mist / vapour / aerosol.)
- P 271: Nur im Freien oder in gut belüfteten Räumen verwenden. (Only use outdoors or in well-ventilated rooms.)
- P 280: Schutzhandschuhe / Schutzkleidung / Augenschutz / Gesichtsschutz tragen. (Wear protective gloves / protective clothing / eye protection / face protection.)
- P 305+351+338: Bei Kontakt mit den Augen: Einige Minuten lang behutsam mit Wasser spülen. Vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen (In case of contact with eyes: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing)
- P 312: Bei Unwohlsein Giftinformationszentrum oder Arzt anrufen. (If you feel unwell, call a poison information centre or doctor.)
- P 405: Unter Verschluss aufbewahren. (Store under lock and key.)
- P 501: Inhalt/Behälter … zuführen. (Feed contents/container ....)
Sicherheitshinweise / EUH | Safety instructions / EUH
- EUH 202: Cyanacrylat. Gefahr. Klebt innerhalb von Sekunden Haut und Augenlider zusammen. Darf nicht in die Hände von Kindern gelangen. ()
| Body Shell Accessories: | Haltesysteme, Karosserie Schutz / Reparatur |
|---|
RC MAKER is the brainchild of Australian touring car driver Ryan Maker. Ryan is a four-time Australian National Modified Touring Car Champion and finished 17th in the 2016 World Championship in Beijing, China. The RC MAKER story began in 2018 and grew and expanded into the store you see today. We are proud to offer all the great brands we resell worldwide, as well as our own products, 95% of which are made in our factory in Melbourne, Australia. Ryan's 16 years of experience in the racing industry guarantees you the best products and the best advice. All the products we develop and distribute, we do so because we believe in them. We have extensive knowledge of every product you see at RC MAKER and will do everything we can to make sure you get the best out of them. Ryan works closely with manufacturers and some of the best riders in the world to develop their world-class products, and sponsors world champion riders like Ronald Völker and Marc Rheinard. We have developed and continue to develop the best products and services for our thousands of customers around the world. Buy with confidence knowing that we will always go the extra mile for you.
Translated with DeepL.com (free version)
RC MAKER Flexible Carbon Anti Tuck Stiffener 1:10 Touring Car for Pro Body Mounts
Product information "RC MAKER Flexible Carbon Anti Tuck Stiffener 1:10 Touring Car for Pro Body Mounts"
Introducing our 3D Pro Carbon Ultra-Lite Flexible Anti-Tuck Stiffener Set for Pro Horizontal Tail Post Mounts
How good is a hard, close race...? until you get a body tuck. With our new ultra-lightweight, durable solution, body tucks are a thing of the past!
These rear fender stiffeners combine very thin carbon rods with the latest 3D printing technology to achieve a feather-light weight of only 1g each! The best part... they attach directly to our Horizontal Rear Post Body Mounts Pro! Simply screw them into the bottom of the empty hole in the HRP Pro, apply the double sided adhesive dots and remove the adhesive backing. Attach them to the rear fender, at least a few millimeters from the wheel well.
This is especially handy these days as bodies are lighter and mounted further forward, leaving little material behind the rear wheel well. This material is often very flexible and can very easily be trapped under the rear wheel.
The plastic parts are printed at a very high resolution and with some of the highest quality filaments on the market to make them suitable for the job. The lower part is printed from a flexible material that puts less pressure on the stock in a crash and conforms to the body while seamlessly attaching with the included tape.
They work with all bodies equipped with our Horizontal Rear Post Body Mounts Pro!
Installation instructions included in the photos
Features:
- Ultra lightweight at only 1 g per side
- Integrates seamlessly with our Horizontal Rear Post Body Mounts Pro
- Significantly increases the stiffness of the Lexan behind the rear wheel well to prevent body bowing
- Fits all popular body styles on the market
- High quality 3D printed parts with carbon fiber rod construction
- Pre-assembled and includes all parts needed for installation
- Tested by our team drivers for performance and durability
| Body Shell Accessories: | Haltesysteme, Karosserie Schutz / Reparatur |
|---|
Ergänzende Informationen / Additional information
Verantwortlicher / Responsible
ToniSport GmbH
Füllscheuer 30, 56626 Andernach
GER
https://www.tonisport.de/
info@tonisport.de
Hersteller / Manufacturer
RC Maker
8/16 Jesmond Road, Helensvale, 4212, QLD
AUS
www.rcmaker.com.au
ryan@rcmaker.com.au
|
ACHTUNG: Nicht für Kinder unter 36 Monaten geeignet wegen verschluckbarer Kleinteile, Erstickungsgefahr. CAUTION: Not suitable for children under 36 months due to small parts that can be swallowed, choking hazard. |
| ACHTUNG: Nicht für Kinder unter 14 Jahren geeignet. Benutzung unter unmittelbarer Aufsicht von Erwachsenen. CAUTION: Not suitable for children under 14 years of age. Use under the direct supervision of adults. |
Sicherheitshinweise GHS / H-Sätze | Safety instructions / Hazard Statements
- H 315: Verursacht Hautreizungen (Causes skin irritation)
- H 319: Verursacht schwere Augenreizung (Causes severe eye irritation)
- H 335: Kann die Atemwege reizen (May irritate the respiratory tract)
Sicherheitshinweise GHS / P-Sätze | Safety instructions / Precautionary Statements
- P 102: Darf nicht in die Hände von Kindern gelangen. (Keep out of the reach of children.)
- P 261: Einatmen von Staub / Rauch / Gas / Nebel / Dampf / Aerosol vermeiden. (Avoid inhalation of dust / smoke / gas / mist / vapour / aerosol.)
- P 271: Nur im Freien oder in gut belüfteten Räumen verwenden. (Only use outdoors or in well-ventilated rooms.)
- P 280: Schutzhandschuhe / Schutzkleidung / Augenschutz / Gesichtsschutz tragen. (Wear protective gloves / protective clothing / eye protection / face protection.)
- P 305+351+338: Bei Kontakt mit den Augen: Einige Minuten lang behutsam mit Wasser spülen. Vorhandene Kontaktlinsen nach Möglichkeit entfernen. Weiter spülen (In case of contact with eyes: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing)
- P 312: Bei Unwohlsein Giftinformationszentrum oder Arzt anrufen. (If you feel unwell, call a poison information centre or doctor.)
- P 405: Unter Verschluss aufbewahren. (Store under lock and key.)
- P 501: Inhalt/Behälter … zuführen. (Feed contents/container ....)
Sicherheitshinweise / EUH | Safety instructions / EUH
- EUH 202: Cyanacrylat. Gefahr. Klebt innerhalb von Sekunden Haut und Augenlider zusammen. Darf nicht in die Hände von Kindern gelangen. ()
| Body Shell Accessories: | Haltesysteme, Karosserie Schutz / Reparatur |
|---|
RC MAKER is the brainchild of Australian touring car driver Ryan Maker. Ryan is a four-time Australian National Modified Touring Car Champion and finished 17th in the 2016 World Championship in Beijing, China. The RC MAKER story began in 2018 and grew and expanded into the store you see today. We are proud to offer all the great brands we resell worldwide, as well as our own products, 95% of which are made in our factory in Melbourne, Australia. Ryan's 16 years of experience in the racing industry guarantees you the best products and the best advice. All the products we develop and distribute, we do so because we believe in them. We have extensive knowledge of every product you see at RC MAKER and will do everything we can to make sure you get the best out of them. Ryan works closely with manufacturers and some of the best riders in the world to develop their world-class products, and sponsors world champion riders like Ronald Völker and Marc Rheinard. We have developed and continue to develop the best products and services for our thousands of customers around the world. Buy with confidence knowing that we will always go the extra mile for you.
Translated with DeepL.com (free version)