SkyRC Setup System 1:10 Offroad Buggy - Black

Thanks to this Sky RC setup system in elegant black, which was specially developed for 1:10 buggies, almost all important and decisive parameters can be optimized easily and conveniently.
Because the better a vehicle is set up, the greater the subsequent driving pleasure and performance.

Adjustable parameters

• Camber (+/- 10°)
• Toe (+/- 40°)
• Caster (+/- 20°)
• Steering

Scope of delivery
4x setting gauges (aluminum) with suspension
1x track gauge (acrylic glass)

How a setup system works on a 1:10 RC car

For ambitious drivers in RC model making , a precisely tuned vehicle is the key to success. A setup system helps to precisely measure and adjust chassis parameters - for better performance on the track. Here we explain how to use a setup system correctly on a remote-controlled 1:10 RC car .

What is a setup system?

A setup system is a special measuring tool that is used for wheel alignment of an RC car. It usually consists of measuring plates, measuring rulers and angle indicators, which are mounted in place of the wheels. This allows important parameters such as:

• Toe (Toe-In/Toe-Out)

• Camber

• Caster

• Steering angle (Ackermann)

precisely measured and adjusted.

Step-by-step instructions: Using the setup system

1. Prepare the vehicle

• Remove the tires

• Ensure that all suspension components can move freely

• Position the vehicle on a flat surface

2. Fit the setup system

• Attach the setup plates to the steering knuckles or wheel carriers (instead of the wheels)

• Ensure that the plates are secure and straight

3. Measure the wheel alignment

• Use the measuring scales to read the difference between the front and rear edges of the setup plates

• Use the track rods to precisely set the Toe-In (toe-in) or Toe-Out (toe-out)

4. Check the camber

• Use the integrated camber gauge on the setup plates

• Set negative or positive camber depending on the track requirements (usually: -1° to -3°)

5. Adjust caster and steering

• Check the caster angle using special caster tools or the setup data

• Check Ackermann (steering geometry) and adjust if necessary

6. Double check

• Measure again after each adjustment

• Adjust the setup symmetrically on both sides

7. Document the setup

• Record all values in writing (setup sheet)

• This makes it easy to reproduce setups for different routes or conditions

Why is a setup system so important?

A precisely adjusted chassis ensures

• More driving stability

• Better cornering behavior

• Even tire wear

• Predictable performance on different track surfaces

Especially inthe competition area of the  1:10 RC-Car Sports (e.g. touring cars or buggy class), a good setup is the difference between victory and defeat.

Tip: Check regularly

Even after crashes or intensive use, it is advisable to re-measure the vehicle with the setup system. The smallest deviations can significantly change the driving behavior.