MKS HBL 575SL Low Profile Digital Brushless Servo
- Product number: MKS-26003
MKS product description
Very powerful and super fast, programmable digital standard servo with low profile, brushless motor, metal gearbox and double ball-bearing output shaft, ideal for 1:10 RC cars. The servo is housed in an aluminum housing with ribbed center section, which ensures perfect cooling even under very high loads.
Increased supply voltage 4.8-7.4 V (nominal voltage), operating voltage 4.8-8.4 V.
With the USB programmer/interface for DSP-1 servos and the PC operating program, you can program a wide range of servo parameters:
STANDARD FUNCTIONS
- Dead band (dead zone): The signal value can change under certain circumstances without affecting the position of the output shaft/servo lever. MKS default value = 1μs or 1.2μs
- Lock (closing): Setting the servo behavior when it does not receive a control signal - Holds the position corresponding to the last signal received / The motor is free, the servo does not hold a position.
- Max. Duty (Max. power): The motor power is limited by this value - it limits the maximum power of the servo motor.
- Pulse Lower (Min. pulse width): The lower limit of the control pulse width and the corresponding size of the servo deflection are limited by this value.
- Neutral (Neutral position): Sets the width of the control pulses in the neutral position/center position of the servo.
- Pulse Upper (max. pulse width): The upper limit of the control pulse width and the corresponding size of the servo deflection are limited by this value.
- Boost (start-up): Motor power when starting from a standstill. The higher the value, the stronger the motor starts.
FEAUTRES
Servo size: Standard
Servo type: Digital
Programmable: Yes
Actuating force with 4.8V [kg∙cm]: 10
Actuating force with 6.0V [kg∙cm]: 13.3
Actuating force with 7.4V [kg∙cm]: 16.8
Speed at 4.8V [s/60st.]: 0.1
Speed at 6.0V [s/60st.]: 0.08
Speed at 7.4V [s/60st.]: 0.07
Control pulse width in neutral position [µs]: 1520
Frame frequency [Hz]: 333
Dead zone [ms]: 0.0008
Servo gear: Metal
Ball bearing: 2×
High voltage: Yes
Power supply [V]: 4.8 - 8.4
Length [mm]: 40.5
Width [mm]: 20.5
Height [mm]: 23.1
Weight [g]: 53.51
Intended for: Aircraft, road cars, off-road vehicles
Car Electronics: | Servos |