MKS HBL 575 Digital Brushless Servo

MKS product description

Very powerful and super fast, programmable digital standard servo with brushless motor, metal gearbox, double ball-bearing output shaft, ideal for RC buggy 1:10 and 1:8. The servo is housed in an aluminum housing with ribbed center section, which ensures perfect cooling even under very high loads.

Increased supply voltage 6.0-7.4 V (nominal voltage), operating voltage 6.0-8.4 V.

With the USB programmer/interface for DSP-1 servos and the PC operating program, you can program a wide range of servo parameters:

STANDARD FUNCTIONS

• Dead band (dead zone): The signal value can change under certain circumstances without affecting the position of the output shaft/servo lever. MKS default value = 1μs or 1.2μs
• Lock (closing): Setting the servo behavior when it does not receive a control signal - Holds the position corresponding to the last signal received / The motor is free, the servo does not hold a position.
• Max. Duty (Max. power): The motor power is limited by this value - it limits the maximum power of the servo motor.
• Pulse Lower (Min. pulse width): The lower limit of the control pulse width and the corresponding size of the servo deflection are limited by this value.
• Neutral (Neutral position): Sets the width of the control pulses in the neutral position/center position of the servo.
• Pulse Upper (max. pulse width): The upper limit of the control pulse width and the corresponding size of the servo deflection are limited by this value.
• Boost (start-up): Motor power when starting from a standstill. The higher the value, the stronger the motor starts.

FEATURES

Servo size: Standard

Servo type:Digital

Programmable:Yes

Actuating force with 6.0V [kg∙cm]:18

Actuating force with 7.4V [kg∙cm]:22

Actuating force with 8.2 V [kg∙cm]:24

Speed at 6.0V [s/60st.]:0.082

Speed at 7.4V [s/60st.]:0.066

Speed at 8.2 V [s/60st.]:0.06

Control pulse width in the neutral position [µs]:1520

Frame frequency [Hz]:333

Dead zone [ms]:0.0008

Servo gear:Metal

Ball bearing:2×

High voltage:Yes

Power supply [V]:6 - 8.4

Length [mm]:40

Width [mm]:20

Height [mm]:38.8

Weight [g]:71.4

Intended for:Aircraft, road cars, off-road vehicles