SKYRC BL Motor Analyzer

The SKYRC Motor Analyzer is a high precision electronic device designed exclusively to check/measure the KV value, RPM (speed), current consumption, motor timing, vibration and Hall sensor function of a bushless motor. It has a two-line 16 character LCD display to show all values in real time. The device is suitable for sensorless as well as sensor controlled brushless motors.

Features:

• KV(RPM per Volt) Displays the RPM per Volt at a given throttle position
• U(VOLT) Shows the input voltage to the motor checker
• RPM (revolutions per minute) Shows the engine speed at a given throttle position
• I(AMP) Shows the current consumption / current draw at a given throttle position
• MOTOR TIMING: Technical timing of the head, usually between 0 and 70 degrees, to adjust it a special tool is needed
• NOISE LEVEL: Poorly mounted motors, defective ball bearings and unbalanced rotors can cause vibration. When a motor vibrates, it creates pressure waves in the air which generate noise. This results in reduced motor performance.
• Phase A, B and C of the sensor are measured and displayed separately

Scope of delivery:

• SKYRC Brushless Motor Analyzer
• Motor Sensor Cable
• Motor cable with 3.5mm banana plug and crocodile clips
• DC input cable with XT60 plug and 4mm banana plug
• DC input cable with XT60 connector and Tamiya connector

Technical data:

• Dimensions (LxWxH): 136.5 x 80.6 x 24.5mm
• Weight: 282g (without cable)
• Input voltage: 7.4-8.4V (Recommended are7.4V 2S 1P LiPo batteries)
• LCD Display: Blue backlight, white text, 16 characters 2 lines
• KV Accuracy: +/- 3%
• Motor timing accuracy: +/- 4%
• Motor timing range: 0-70
• Noise level measuring range: 60dB - 120dB
• Supported motors: Sensor &Sensorless Brushless motors (2 poles to36 poles)
• Power consumption less than 30A at 8.4V without load