Junsi iCharger 458 Duo Charger
- Product number: JU-458DUO
- Info: Item excluded from all discount campaigns
With the iCharger 458DUO, the renowned manufacturer Junsi has completely renewed the well-known 308DUO charger technically.
The new 458DUO charger combines the advantages of the well-known Junsi iCharger 308DUO with the latest technology and thus significantly more power and new features.
The two charging outputs are equipped with high current resistant XT90 connectors to transfer the power permanently.
The technical data is impressive, 2200W charging power (from >40V), 1-8s LiXx cells and up to 45Amp charging current are also sufficient for large batteries with high capacity. Of course, all other battery types such as LiHV, LiIo, NiZn, PB, NiCd or NiMh batteries can be charged.
The discharge power is 140Watt total (80W per output if only one output is used), but can be increased by external load (discharge resistor) up to 2200W. Of course, the iCharger 458DUO is also capable of regenerative charging. Here, for example, the battery capacity of a full flight battery is fed back into the supply battery.
The balancer current of 4 amps total (2A per output) always ensures perfectly balanced cell voltages.
A USB-C PD port for charging smartphones etc (5V/3A, 9V/2A, 12V/1.5A) or for software updates is also built in. The Micro SD slot can be used for logging data, but also for future updates.
New is the function "Digital Power" here an output can be used as a stabilized power supply. The output voltage can be set from 2V to 32V, the current from 1A-45A (Please note that for this an appropriate supply must be given!) )
Also integrated is a servo tester, please note that an external power supply is necessary!
The menu navigation is almost identical to the known Junsi iCharger 308DUO, 406 DUO or 4010DUO.
A 2.8" IPS LCD display ensures good readability even in low light.
A manual in English is included with the charger in the form of a CD, the German version can be downloaded from us.
All Junsi chargers of the X and DUO series are developed and approved for use in model making. Industrial use is not intended and therefore not permitted! All Junsi chargers may only be operated with power supplies developed for model making! No AGM batteries may be charged in the PB program!
INFO: Junsi chargers are always delivered WITHOUT charging cable (XT90 connection).
| Charging current adjustable per output: | 0,05A - 45A |
| Charge current adjustable in synchronous mode: | 0,05A - 70A |
| Input voltage: | 10V - 49V DC |
| Width (mm): | 117,8 |
| Discharge power Max. in synchronous mode: | 140W |
| Max. Voltage lead-acid batteries: | 15 (2 - 30V) |
| Charging power Max. on one output: | 1600W |
| External high current discharge asynchronous: | 1600W |
| Length (mm): | 171,2 |
| Accuracy balancer (depending on setting): | 1mV |
| Balancer compensation current per output: | 2 |
| Max. Power: | 22000W |
| External high current discharge synchron: | 2200W |
| Charging power Max Syncron: | 2200W |
| Max. Discharge Power: | 2200W |
| Max. Number of NiCd/NiMH batteries: | 25 |
| Height (mm): | 57,5 |
| Max. Charging current: | 70A |
| Input current limit: | 70A |
| Discharge power per output: | 80W |
| Weight (g): | 930 |
| Micro SD Card Slot: | Yes |
| Power supply integrated: | No |
| Electronics: | Chargers |