SkyRC D100 Ladegerät AC/DC DUO LiPo 1-6s 2x100W - V2

The Sky RC D100 V2 is a charger with two charging outputs, voice guide, power distribution, scan to go, etc....

It has a large 128 x 64 LCD display which shows the status of both outputs at any time. Included are the power cable, 2x XT-60 charging cables, 2x charging cables with open end and 2x XH balancer adapter boards and a detailed German manual.

The SKYRC D100 V2is a 2-channel charger with two independent circuits to charge two types of batteries in parallel. Through active power distribution, the D100 V2 always provides the maximum possible power to each channel to shorten charging times. The D100 V2 can also be connected to a PC for control and firmware update. The D100 can also be used as a lithium battery meter or to measure internal resistance. For safety, the D100 V2 has a number of automatic safety shutdowns such as about charge current limit, capacity limit, max temperature or charge time.

Top features:

• LiHV charging mode: ready for the next generation of LiPo batteries. This mode provides a battery end voltage of 4.35 volts / cell and thus for more power in your model. However, be sure to check first that it is also a LiHV battery.
• Fast & Storage Charge: The FAST & STORAGE mode is available when charging lithium batteries. When charging in Fast mode, the battery will not hold capacity as long as when charging in STORAGE mode. Therefore, STORAGE mode is ideal when a battery is to be stored for a longer period of time.
• Re-Peak Mode: In Re-Peak charging mode of NiCd or NiMH, the battery is automatically charged up to 3 times to the PEAK value. This ensures that the battery is 100% fully charged.
• Cyclic charge / discharge: Here the battery is charged up to 5 times and immediately discharged again. It is optimal to reactivate older or damaged cells or to equalize the cells of a pack.
• Battery Meter: It can check and measure the total voltage, highest voltage, lowest voltage and voltage of each cell.
• LiPo Internal Resistance Meter: It can measure the internal resistance of each cell or the compl. pack.

Optional smartphone APP for the charger:

Smartphone control via Bluetooth. This is especially on races extremely practical and important because you are not always at the place to perceive the current status, a power failure or error.

Technical data:

• Input voltage: (AC) / (DC) 100 to 240V / 11 to 18V
• Charging current: 0.1 to 10A
• Max. Charging power: 2x 100W (DC) / 100W (AC)
• Discharge current: 0.1 to 5A
• Max. Discharge power: 2x 10W
• Max. Balancer equalization current: 200mA
• Cell count (LiPo, LiFe, LiIon): 1 to 6S (3.7 to 22.2V)
• Number of cells (NiMH / NiCd): 1 to 15 cells
• Weight without cable: approx. 975g
• Dimensions: approx. 163 x 153 x 72mm

Scope of delivery:

• D100 V2 charger
• Mains plug for the socket
• 2x charging cable without plug (to solder yourself)
• 2x XT-60 charging cable
• 2x Balancer Adapter XH Type for 2 to 6S Lipos
• German instruction manual