inkl. MwSt. zzgl. Versandkosten
- Artikel-Nr.: HW-30112000
Compact design for easy installation. Compatible with sensored/sensorless brushless motors.... mehr
Produktinformationen "Hobbywing XeRun XR10 Justock ESC"
- Compact design for easy installation.
- Compatible with sensored/sensorless brushless motors. In sensor mode, it’s compatible with most popular sensor- brushless motors on the market. In sensorless mode, it’ s compatible with 99% of brushless motors on the market.
- Aluminum housing top with excellent heat dissipation and great current endurance.
- The timing has been permanently set to 0 degree. With the identical competition motor, this ensures that every driver will have the same power system.
- Proportional brake with 4 steps of maximum brake force, 8 steps of drag brake force and 4 steps of initial brake force.
- 9 levels of acceleration/ punch from “soft” to “aggressive” for different vehicles, tires and tracks.
- Multiple protections: motor lock-up protection, low-voltage cutoff protection, thermal protection and fail safe (throttle signal loss protection).
- Single-button ESC programming and factory reset.
- Advanced programming via portable LED program card or multifunction LCD program box. ( Purchase separately)
- Firmware upgrade via HOBBYWING multifunction LCD program box (purchase separately).
- Cooling fan is included.
- HOBBYWING's Innovative heat dissipation structure aluminum bottom case improves the heat dissipation - Patent pending
- Pre-soldered professional grade gauge wires
|Current||Continuous:60A, Burst: 380A|
|Input * Note #1||2-3S LiPo or 4-9 cells NiMH/NiCd|
|Built-in BEC||6V@2A (linear mode BEC)|
|ESC programming||Via RX Cable (or Throttle Control Cable)|
|Motor Supported||Sensor and sensorless brushless motor|
|Motor KV Limit||With 2 Lipo or 4-6 NiMH|
1/10 on-road: >=8.5T, 1/10 off-road: >=11.5T
With 3 Lipo or 7-9 NiMH
1/10 on-road: >=13.5T, 1/10 off-road: >=17.5T
|Suitable Car||1/10,1/12 all competitions|
1/10,1/8 rock crawler
|Cooling Fan||Powered by stable BEC 6V|
|Size||33.5mm(L) * 28.5mm(W) * 30.5mm(H)|
|Weight||59.8g (w/o wires, cooling fan)|
|* Note #1|
For 4-6 cells NiMH/NiCd or 2S LiPo, the standard cooling fan needn't be changed.
For 7-9 cells NiMH/NiCd or 3S LiPo, the standard cooling fan needs to be changed to 12V high voltage fan.
Weiterführende Links zu "Hobbywing XeRun XR10 Justock ESC"